Download Latest & Tested Samsung SM-J500F Flash File Firmware (Stock Rom) and start flashing your Samsung device with it.
Flashing is a process which helps to revamp your mobile Software. If you are facing any Software related issues in your Samsung mobile then Stock Rom will help you a lot.
To flash your phone, you will all the required files like Flash File, Flash Tool & USB Drivers. In this guide, we will provide you all the required files and guide to install stock Rom on your phone.
About Flash File:-
Stock Firmware is widely used to Upgrade or download the device software. It can fix a wide range of problems like Stuck at logo, crashing of apps, Wifi issues, Network issue, etc. It can also recover the device from boot loop, hang, and several other problems.
Stock Firmware or Flash File is an Official software provided by the Manufacturer itself. This software manages and control the hardware portion of the device.
As it is an official Software by company so you can use it without any doubt on security. Flashing it on your Samsung android device can repair lots of Software bugs.
Download Samsung SM-J500F Flash File (Firmware)
Download latest and tested Samsung SM-J500F Flash File (Firmware) without password. We have shared Google drive link to download firmware for your Samsung phone. The file has been officially released by the Samsung company. So you can use it without any security concern.
Note: Make sure you are downloading the correct version of Firmware for your mobile variant.
Device Supported: Samsung GT-C3312
Rom Type: Stock Rom
Flash Tool: Odin Download Tool
How to Flash Samsung SM-J500F
We are providing a guide to Install Samsung SM-J500F Flash File Firmware (Stock Rom). This is a Step by Step guide to Flash Stock Rom on Samsung mobile. Before you start it following read all the steps carefully.
You will be able to flash your device on your own using this tutorial and fix a bunch of mobile software issues. Before flashing your device, you must fulfil some prerequisites.
- You must have working pc.
- A Working USB cable
- Mobile should be charged up to 70%.
- Install the supporting USB drivers
- Have a compatible flash tool
- Have correct variant of Firmware file
- Take backup of your entire phone data.
- This firmware will only work with Samsung SM-J500F mobile.
- Download & Odin Tool on your PC.
- Download and Install USB Drivers on windows pc.
Steps to Flash Samsung SM-J500F Flash File
You need to follow the Steps to flash or install Stock Rom on your Samsung Device.
Step 1: Download Stock Firmware and Unzip it on your PC (If you have already downloaded it then skip this step).
Step 2: Download & Install the Samsung USB Drivers on your PC (If you have already installed drivers on pc, skip this step).
Step 3: Download & Extract ODIN Tool on Your PC.
Step 4: Now Switch OFF your samsung device.
Step 5: Now bring your phone into the Download Mode. To boot device into the Download mode: Press & Hold Power button, Home Button & Volume Down button. Once the phone vibrates Leave the Power button, but keep on holding Volume Down & Home button till device boot into the Download mode.
Step 6: You will see a Warning Message on the screen. Press Volume UP button once to continue the process.
Step 7: Now Run the ODIN Tool from the extracted tool folder.
Step 8: Connect your phone with PC VIA USB cable.
Step 9: Once you connect the device with PC, ODIN will automatically detect the device and a message “added” will show on the left side under “Log“.
Step 10: Once the Device is detected by the Tool, Click on PDA/AP button and Select the .md5 extension file from the extracted Firmware folder.
Step 11: Now Click on Start button so the tool can start flashing.
Step 12: Sit back! The flashing will take few minutes to complete now. During this process your mobile may restart multiple times. Don’t disconnet your phone until the entire process is done.
Step 13: Once the flashing is done, a Reset or Pass Message will appear on the Tool’s Screen.
Step: 14: Now you can Disconnet the USB cable from the phone. Your phone will restart and some remaining process will run on your Samsung device. Let it complete.
After this process is done, you can start using phone in normal mode. I hope you loved this article. If you have any suggestion or query related to this article, please ask in comment section.
Safe: We have shared the official Stock Rom for Samsung SM-J500F device. So it is completely safe and genuine software to use in flashing. If you find the download link broken, do notify us in comment section. We will replace the link immediately.
Unbrick phone: Using the Stock Rom provided in this article, you can Unbrick your phone. Moreover, fix the software bugs in your Samsung device. The Stock Rom help resolving boot loop, app crash, Wifi issue, Network issue, failed system update, invalid IMEI, stuck at Samsung logo, etc.
Caution: You need to carefully read the flashing instructions and confirm the mobile variant before flashing. Flashing wrong firmware can brick your mobile phone. The site won’t be liable to any damange occur during/end of the process.
I hope you have successfully downloaded and installed Samsung SM-J500F Flash File on your device. For more Firmware file downloads, Visit Home page.